EN
43
Product
presentation
Installation
Settings /
Operation
Servicing and
Warranty
Technical specifications 5.
Dimensions (Height x Width x Depth)
Hot water/cold water connection
Anti-corrosion protection
Electrical connection (voltage / frequency)
Appliance maximum total power consumption
Heat pump maximum power consumption
Electric booster pump power consumption
Setting range of the water temperature set point
Operating temperature range of the heat pump
Energy efficiency class for water heating
Refrigerant fluid R134a Volume
2
Fluid load in relation to the volume of water
Quantity of hot water at 40°: V40td in 8hrs (Off-peak Hours)
Quantity of hot water at 40°: V40td in 14hrs (Off-peak Hours + 6 hrs)
Certified NF Electricity Performance
Certified Performance at 15° C Air (CDC LCIE 103-15/B) & uncoated**
Coefficient of performance (COP)
Power consumption in steady operation (Pes)
Reference temperature (Tref)
* Tested in semi-anechoic chamber according to ISO3744.
** Performance measured for water heating from 10° C to 54° C according to the protocol of the NF Electricité Performance specification N° LCIE 103-15B, for self-
contained thermodynamic storage water heaters (based on the standard EN 16147 with a L load profile in 200 L and a XL load profile in 270 L).
These units comply with the 2014/30/EUdirective on electromagnetic compatibility, the 2014/35/EU directive on low voltage, the 2011/65/EU directive on ROHS and
with the 2013/814/EU
Regulation supplementing the 2009/125/EC Ecodesign directive.
To Next Page
Loading...
