Atlantic EGEO - Installation Procedures; Installation Process Overview; Unpacking and Handling

EN
45
Product
presentation
Installation
Settings /
Operation
Maintenance,
Servicing and
Troubleshooting
Warranty
Installation
Block diagram of an installation 1.
Installation
d’unchauffeeau
Déballage
Manutention
Raccordementhydraulique
Remplissage
Paramétrage
Raccordementélectrique
Finde
l’installation
Misesoustension
Miseenplace
Unpacking 2.
Comply with unpacking recommendations located on the water heater packaging.
We shall not be held liable for any defect in the product resulting from unpacking of the product
which does not comply with our recommendations.
Handling 3.
Comply with the transportation and handling recommendations located on the water heater
packaging.
For the handling of the water heater, use the strap provided for this purpose to carry the appliance
the proper way as shown in the figure below.
Installation
of a water heater
Unpacking
Handling
Hydraulic connection
Filling
Settings
Electrical connection
Appliance
installed
Turning on power
Setting up