Atlantic EGEO - Accessing Internal Compartments

58
Product
presentation
Installation
Settings /
Operation
Maintenance,
Servicing and
Troubleshooting
Warranty
III. Loosen the half-ferrules by rotating them.
IV. Remove the 2 half-ferrules by lifting them and place them away from the work on the water heater.
Troubleshooting 4.
In case of any malfunction, absence of heating or release of steam when drawing off, turn off the power supply and
notify your installer.
Repair work should only be performed by a professional.
4.1. Problem solving/malfunction indication
For every malfunction, the LED indicator is solid.
4.1.1. Problem / solving "Tank" malfunction indication
Error code
Indication
Err 03 Electrical malfunction
of the water sensor
The LED will flash twice
Err 07 ACI malfunction
The LED will flash 3 times
Err 09 Water too hot
The LED will flash 4 times
1
2
11
2 2