Atlantic EGEO - Absence Mode Operation

56
Product
presentation
Installation
Settings /
Operation
Maintenance,
Servicing and
Troubleshooting
Warranty
Maintenance, servicing and troubleshooting
Advices to the user 1.
The water heater must be drained when the absence mode cannot be used or when the appliance is turned off.
Proceed as follows:
I. Turn off the power supply. II. Close the cold water supply.
III. Open a hot water faucet. IV. Open the drain valve of the
safety unit.
Maintenance 2.
In order to maintain the performance of your water heater, it is recommended to perform regular maintenance.
By the USER:
What
When
How
Security unit Once or twice a month
Operate the pressure relief valve.
Check for proper flow of water.
General condition Monthly
Check the general condition of your appliance:
no Error code , no leaks at the level of the water
connections...
The appliance must be turned off before opening the front cover and the top cover.
Par the PROFESSIONAL:
What
When
How
The drainage of
condensate
Annually Check if the condensate drain is clean.
Electrical connections Annually
Check the wires on internal and external wiring to make sure
they are not loose and all connectors are in place.
Electric booster pump Annually
Check the proper functioning of the electric booster pump
through a power measurement.
Scaling Every 2 years
If the water supplied to the water
heater contains water
scales, descaling is required.