Program Function
‘Measured data’ Calls up the data currently measured and the status of a number of inputs.
‘Counters’ Calls up the running hours, loaded hours, regulator (module) hours and number
of motor starts.
‘Test’ Display test.
‘Modify Params’ Modifies the settings for:
• Parameters (e.g. loading and unloading pressures)
• Protections (e.g. temperature shut-down level)
• Service plans (timers for service plans)
• Clock functions (automatic compressor start/stop/pressure band commands)
• Configuration (time, date, display language,...)
‘Service’ Calls up service plans and resets the timers after carrying out the service actions
belonging to a plan.
‘Saved data’ Calls up the saved data: last shut-down, last emergency stop data.
3.7 Main screen menu
Function
Control panel
The Main screen menu shows the status of the compressor operation and is the gateway to all functions
implemented in the regulator.
Procedure
The Main screen is shown automatically when the voltage is switched on.
If the function or arrow keys (1, 2 and 3) are not used for some minutes, the regulator will automatically
return to the Main screen.
Whenever displayed on a submenu screen, press the ‘Main’ key (F1) to return to the Main screen.
Instruction book
30 API603130
To Next Page
Loading...
