Example of Main screen
‘Compr. Outlet’
bar 7.0
‘Auto Loaded’
‘Menu’ ‘Unld’
F1 F2 F3
The display indicates:
• The name of the sensor and its actual reading
• Messages regarding the compressor operating condition
• Just above the function keys (3), the actual functions of these keys
3.8 Calling up menus
Description
Control panel
When the voltage is switched on, the Main screen is shown automatically.
‘Compr. Outlet’
bar 7.0
‘Auto Loaded’
‘Menu’ ‘Unld’
F1 F2 F3
The arrow down key (1) can be used for a quick look at the actual compressor status.
After pressing the ‘Menu’ (F1) key, the option ‘Status data’ will be followed by a horizontal arrow:
• Either press the tabulator key (2) to select this menu,
• Or use the arrow down key (1) until the desired submenu is followed by a horizontal arrow and then
press the tabulator key (2) to select this menu.
Instruction book
API603130 31
To Next Page
Loading...
