Air filter
Position of the service indicator
Regularly check the service indicator. If the coloured part of service indicator (VI) shows full out, replace
the air filter element. Reset the service indicator by pushing the knob in the extremity of the indicator body.
Drains
Regularly check that condensate is discharged during operation. See section Condensate system. The
amount of condensate depends on environmental and working conditions.
5.5 Checking the display
Procedure
Control panel, Elektronikon II
On compressors equipped with an Elektronikon II regulator, check the display (2) regularly for readings
and messages. Normally, the display shows the compressor outlet pressure, the status of the compressor
Instruction book
API603130 69
To Next Page
Loading...
