Starting from the Main screen (see Main screen menu):
• Press the key ‘Menu’ (F1).
• Press the arrow down key (1) until ‘Modify Params’ is followed by a horizontal arrow.
• Activate the menu by pressing tabulator key (2).
• Use the arrow down key (1) to scroll until the option ‘Clock Function’ is followed by a horizontal
arrow.
• Activate the menu by pressing tabulator key (2); the following screen appears:
‘Clock Function’
‘Not Activated’
.
‘Menu’ ‘Mod.’ ‘Del.’
F1 F2 F3
• Press the tabulator key (2), the following screen appears:
‘Monday’
‘Tuesday’
‘Wednesday’
‘Menu’ ‘Mod.’ ‘Del.’
F1 F2 F3
• Use the scroll keys (1) until the day on which a command must be programmed is followed by a
horizontal arrow. Press the tabulator key (2); the following screen appears:
--:-- ----------------------
--:-- ----------------------
--:-- ----------------------
‘Menu’ ‘Mod.’ ‘Del.’
F1 F2 F3
• Press the key ‘Mod.’ (F2). The first two dashes will flash. Use the scroll keys (1) to enter 06. Press
the tabulator key (2) to jump to the following two dashes. Use the scroll keys to enter 15. Press the
tabulator key to jump to the row of dashes. Use the scroll keys to enter the command ‘Start’.
• Press the key ‘Prog’ to program the command: ‘06:15 Start Compressor’.
• Press the arrow down key (1): the horizontal arrow indicates that the second line is accessible. Press
the key ‘Mod.’ and modify this line in a similar way to the following command: ‘06:15 Pressure Band
1’.
• Press the key ‘Menu’ (F1) and scroll to ‘Friday’:
‘Thursday’
‘Friday’
‘Saturday’
‘Menu’ ‘Del.’
F1 F2 F3
Instruction book
API603130 43
To Next Page
Loading...
