Text on figure
(1) Menu
(2) Regulation
• Using the Scroll keys, move the cursor to the Counters icon (see above, section Menu icon)
• Press the Enter key. Following screen appears:
Text on figure
(1) Counters
(2) Running Hours
(3) Motor Starts
(4) Load Relay
(5) VSD 1-20 % rpm in % (the percentage of the time during which the motor speed
was between 1 and 20 %)
(6) Recirculation Cycles
(7) Recirculation Failures
The screen shows a list of all counters with their actual readings.
Instruction book
2920 7109 23 39
To Next Page
Loading...
