(1) Week Timer
(2) Week Action Schemes
(3) Week Cycle
(4) Status
(5) Remaining Running Time
• This timer is used when the week timer is set and for certain reasons the compressor must continue
working, for example, 1 hour, it can be set in this screen. This timer is prior to the Week Timer
action.
(1) Week Timer
(2) Week action schemes
(3) Remaining Running Time
3.16 Test menu
Menu icon, Test
or
Function
• To carry out a display test, i.e. to check whether the display and LED's are still intact.
Procedure
Starting from the Main screen,
• Move the cursor to the action button Menu and press the enter key (2), following screen appears:
Instruction book
60 2920 7109 23
To Next Page
Loading...
Need help?
General
