warning when either 4000 running hours or 8760 real hours are reached, whichever comes first. Note that
the real time hours counter keeps counting, also when the controller is not powered.
The figures within the bars are the number of hours to go till the next service intervention. In the example
above, the compressor was just started up, which means it still has 4000 running hours or 8280 hours to go
before the next Service intervention.
Service plans
A number of service operations are grouped (called Level A, Level B, etc...). Each level stands for a
number of service actions to be carried out at the time intervals programmed in the Elektronikon
®
controller.
When a service plan interval is reached, a message will appear on the screen.
After carrying out the service actions related to the indicated levels, the timers must be reset.
From the Service menu above, select Service plan (3) and press Enter. Following screen appears:
Text on image
(1)
Service Plan
(2)
Level
(3)
Running hours
(4) Real Time (hours)
(5)
Modify
Modifying a service plan
Dependant on the operating conditions, it can be necessary to modify the service intervals. To do so, use
the Scroll keys to select the value to be modified. A screen similar to the one below appears:
Press the Enter key. Following screen appears:
Instruction book
2920 7109 23 43
To Next Page
Loading...
Need help?
General
