Atlas Copco LP 8504

Handbrake label
Securing point label
Use ear protectors label
Data signs label
The identity plate is positioned behind the battery on
the transmitter.
A
B
C
A. Serial number
B. Model designation
C. Frequency band
Transport
Lifting the machine
WARNING Lifting hazard
Never lift the machine without checking if it is intact.
A damaged machine can fall apart, which can result
in serious injury.
► Check that all equipment is dimensioned in
accordance with applicable regulations.
► Never tow the machine.
► Only move the machine.
► Never walk or stand under a lifted machine.
► Only lift the machine by a hook on the frame.
► Never lift the machine by the lifting eye at the
engine.
► Check that the shock absorbers, safety straps and
protective frame are correctly attached and not
damaged.
► Check the machine's data plate for information of
the weight.
Lifting the machine
♦
Before lifting the machine check that the shock
absorbers (A) and safety frame lifting point (B) are
correctly attached and not damaged.
♦
Only use the safety frame lifting point (B) for lifting
the machine.
A
B
Secure transport
WARNING Transport hazard
During transportation always strap the machine
securely for all transportation, otherwise it can cause
injury.
► Use the front and rear towing attachments points
to secure the machine.
► Use the parking brake.
Secure transport
Secure the machine for all transportation.
© 2015 Construction Tools EOOD | No. 9800 1147 01d | 2015-11-11
Original instructions
14
LP 8504Safety and operating instructions