Maintenance routines:
♦
Check and replenish engine oil. See engine
manual for more information.
♦
Check and replenish fuel.
♦
Check for oil leaks.
♦
Check the dust extractor valve on the air filter.
♦
Clean and refit the air filter.
♦
Check the hydraulic oil level.
♦
Check scraper adjustment.
♦
Check the tightness of all nuts and bolts.
♦
Check the functions of the transmitter and the
receiver.
♦
Clean the machine.
Checking the engine, Hatz
♦
Stop the engine and wait for a few minutes. The
machine must be in a horizontal position.
♦
Check the oil level on the dipstick (A). Fill with oil
(B) to the upper marking if necessary.
♦
Check the fuel level (C).
♦
Check the engine for oil leaks.
Cleaning dust extractor valve
♦
Check air intake. Clean if necessary
♦
Check dust extractor valve (A) for free flow.
remove any blockages by pressing together.
Check connecting hoses and clamps.
See the engine manual for more information.
Cleaning the air filter
♦
Tap the filter against the palm of the hand until all
loose dust is dislodged. Do not tap the filter
cartridge against any hard objects.
♦
The filter must be replaced if it is wet or oily.
See the engine manual for more information.
25© 2015 Construction Tools EOOD | No. 9800 1147 01d | 2015-11-11
Original instructions
Safety and operating instructionsLP 8504
To Next Page
Loading...
