Atlas Copco PTS 800 T3 Cud - Page 117

- 117 -
Note 22: Housing AMP 154719-0 (positive lock housing 1 pos 6.3 mm)
Receptacle AMP 1-160759-1 (positive lock receptacle 6.3 mm, 20-16 awg)
Note 23: Housing AMP 154719-0 (positive lock housing 1 pos 6.3 mm)
Receptacle AMP 790319-3 (positive lock receptacle 6.3 mm, 12-10 awg)
Note 24: Housing AMP 154719-0 (positive lock housing 1 pos 6.3 mm)
Receptacle AMP 154717-3 (positive lock receptacle 6.3 mm, 14-11 awg)
Note 25: Housing AMP 926522-1 (positive lock housing 2 pos 6.3 mm)
Receptacle AMP 1-160759-1 (positive lock receptacle 6.3 mm, 20-16 awg)
Note 26: Connector: Deutsch DT06-4S
Terminals: Deutsch 0462-201-16141
Secondary Lock: Deutsch W4S
Unused cavities to be sealed with: Deutsch 114017
Note 27: Provide a yellow marking label on the brading, acting as a reference point during assembly.
Note 28 : Connector: Deutsch HD10-9-1939P
Terminals: 0460-202-16141
Protective cover: Deutsch HDC 16-9
Protective cover fixed to harness with a wire
Both ends of the wire run at least 200 mm into the wire harness.
Unused cavities to be sealed with: Deutsch 114017