Atlas Copco PTS 800 T3 Cud - Operating the Pc4003 Controller

- 41 -
5.2 Operating and setting the
Pc4003™ controller
5.2.1 Pc4003™ button overview
1
POWER OFF / ON switch
To switch the control panel on and
off.
2
START button
To start the compressor.
3
STOP button
To stop the compressor in a
controlled way.
4
LOAD button.
Pressing this button will:
– initiate the Auto Load
function, or commands the
compressor to load (depending
on actual status).
– command the compressor to
switch to Not Loaded (when in
Load).
5
MEASUREMENTS VIEW button
To toggle between Measurements
View and Main View.
6
SETTINGS VIEW button
To toggle between Settings View
and Main View.
7
ALARMS VIEW button
To toggle between Alarms View and
Main View.
8
NAVIGATION buttons
To navigate through the display
menu’s.
9
ENTER button
Confirms/stores the selection/
change.
10
BACK button
Moves back one level or ignores the
change.