- 65 -
6.4.2 Air filter
6.4.2.1 Main parts
6.4.2.2 Cleaning the dust trap
To remove dust from the dust trap pinch the vacuator
valve (6) several times.
6.4.2.3 Replacing the air filter element and
the safety cartridge
The instructions apply to both air filter engine and air
filter compressor.
– Release the snap clips (1) and remove the dust trap
cover (2). Clean the inside of the cover.
– Withdraw the filter element (4) and safety
cartridge (3) from the housing (5).
Discard the filter element when damaged.
A dirty safety cartridge is an indication of a
malfunctioning filter element.
1 Snap clips (4x)
2 Dust trap cover
3 Safety cartridge
4 Filter element
5 Filter housing
6 Vacuator valve (dust ejector)
The Atlas Copco air filters are
specially designed for the
application. The use of non-genuine
air filters may lead to severe damage
of engine and/or compressor
elements.
Replace the filter element and the
safety cartridge at the same time.
New elements should be inspected
for tears and punctures before
installation.
The safety cartridge cannot be
cleaned.
To Next Page
Loading...
