- 39 -
4.2 Parking
– Locate the wind direction and place the rear end of
the unit upwind, away from contaminated wind
streams and walls. Avoid recirculation of exhaust
air from the engine. This causes overheating and
engine power decrease.
– Park the unit on solid level ground. The
compressor can operate in a slant position not
exceeding 5° (in both senses: front/rear and left/
right).
– Place wheel chocks (1) in front of and behind the
wheels or apply the parking brake (2) before the
unit is disconnected from the towing or lifting
vehicle.
– Lock the towbar (3) in the raised position with the
catcher (4).
To Next Page
Loading...
