Atlas Copco PTS 800 T3 Cud - Heater Box; External Emergency Stop

- 29 -
3.4.7 Heater box
The PTS 800 T3 Cud is equipped with the following
circuit breakers for the heaters:
3.4.8 External emergency stop
The PTS 800 T3 Cud offers the possibility to install
an external emergency stop.
To enable the remote emergency stop feature, open
the emergency switch box and clear the bridge
between the 2 terminals as indicated on the
instruction label (1).
When Remote Emergency Stop is NOT required
(factory setting)
– Install the bridge between the terminals
Q14 Circuit breaker heater EU/battery charger
Q15 Circuit breaker heater USA/battery charger
Q16 Circuit breaker heater USA
Q14
Q16
Q15
1
Internal E-stop
Install bridge