Atlas Copco PTS 800 T3 Cud - Page 6

- 6 -
5.2.9.4 Set Language....................................54
5.2.9.5 Set Units ...........................................54
5.2.9.6 Change Display Settings .................54
5.2.9.7 Go To Diagnostics............................54
5.2.9.8 Set the AutoLoad Function..............54
5.3 Operating the automatic fire
suppression system.........................56
6 Maintenance..............................58
6.1 Maintenance schedule.....................58
6.1.1 Use of preventive
maintenance schedule.....................61
6.1.2 Service packs and kits......................61
6.2 Engine maintenance procedures....62
6.2.1 Engine oil level check ......................62
6.2.2 Engine oil and oil filter change........62
6.3 Compressor maintenance
procedures........................................62
6.3.1 Compressor oil level check .............62
6.3.2 Compressor oil and oil filter
change...............................................63
6.3.3 Compressor element
overhaul ............................................63
6.4 Adjustment and servicing
procedures........................................64
6.4.1 Coolant..............................................64
6.4.1.1 Coolant level check ..........................64
6.4.1.2 Replacing the coolant ......................64
6.4.2 Air filter .............................................65
6.4.2.1 Main parts.........................................65
6.4.2.2 Cleaning the dust trap......................65
6.4.2.3 Replacing the air filter
element and the safety
cartridge............................................65
6.4.2.4 Cleaning the filter element ..............66
6.4.3 Fuel system.......................................66
6.4.3.1 Draining fuel filters...........................66
6.4.3.2 Priming the system ..........................67
6.4.3.3 Cleaning fuel tank.............................67
6.4.4 Cleaning coolers...............................67
6.4.5 Poly V-belt tension adjustment.......68
6.4.6 LP and HP safety valve
adjustment........................................69
6.4.7 Battery care.......................................70
6.4.7.1 Electrolyte .........................................70
6.4.7.2 Activating a dry-charged
battery ...............................................70
6.4.7.3 Recharging a battery........................70
6.4.7.4 Maintaining the battery
voltage...............................................70
6.4.8 Servicing water separator ...............71
6.5 Engine consumable specifications .72
6.5.1 Engine fuel specifications................72
6.5.2 Engine oil specifications ..................72
6.5.2 Engine oil specifications ..................72
6.5.3 Engine coolant specifications..........73
7 Checks and trouble
shooting .................................... 74
7.1 Problem solving chart......................74
7.2 Battery and alternator precautions 74
7.3 Trouble shooting..............................75
7.4 Compressor control module
trouble shooting...............................81
7.4.1 Process information .........................81
7.4.2 Fault codes........................................81
7.5 Shutdown sensors ...........................84
8 Storage of the compressor...... 84
8.1 Storage instructions ........................84
9 Disposal..................................... 85
9.1 General..............................................85
9.2 Disposal of materials .......................85