*Subject to change without notice Atomos Shogun Flame – User Manual Edition 1: May 2016 17
File Naming
Allows you to select the scene and shot number that will be recorded
as well as change the unit / media name. To change the unit name tap
the arrow under UNIT/MEDIA NAME, Use the left and right arrows to
select a letter, and the up and down arrows to change its value.
To modify the scene and shot number under CONFIGURE FILE NAME,
select plus or minus next to scene or shot (up to 999). The number
youchoosewillthenbeshowninthelenameatthetopofthe
screen during recording, the take number is automatically increased
with each take.
Date & Time
Allows you to adjust the date and time shown by the clock in the
Shogun Flame. This will also change the time of day Timecode.
Touching the Date & Time takes you into the Date and Time Screen.
Date formats (i.e. dd-mm-yyyy or mm-dd-yyyy) are selectable by
tappingthebluearrowon“SelectDateFormat”Menu.Simplykeep
tapping until the desired format is shown. The Time, Month, Day and
Yearareselectableandcanbemodiedbyclickingtheblueplus
andminusiconsnexttothedesiredelds.
For both Time of Day Timecode and Scheduling start times for Time Lapse record mode it’s important to ensure that the correct
time is set.
7. Using the Shogun Flame cont.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
