Need help?Do you have a question about the Atomos NINJA V+ and is the answer not in the manual?
General| Display Size | 5.2 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Brightness | 1000 cd/m² |
| Touchscreen | Yes |
| HDR Support | Yes |
| Input | HDMI 2.0 |
| Output | HDMI 2.0 |
| Video Recording | Yes |
| Recording Formats | Apple ProRes, Avid DNxHR |
| Power | DC Input, Battery |
| Battery Type | L-Series |
| Weight | 360g |
| Dimensions | 151 x 91.5 x 31 mm |
| SDI Input | 12G SDI |
| SDI Output | 12G SDI |
Guidelines for safe operation and handling of the NINJA V+ unit.
Precautions for handling disk drives to prevent static discharge damage.
Conditions and circumstances not covered by the product warranty.
Details the 3.5mm input jack for audio.
Describes the 3.5mm headphone jack for audio output.
Explains the 2.5mm jack for remote control and calibration.
Setting the correct date and time for accurate file metadata.
How the unit name affects recorded clip filenames.
Why HDDs are not recommended for use with the NINJA V+.
Information about using 2.5" SSDs as basic storage media.
Importance of backing up recorded content to prevent data loss.
Why file deletion is not supported and advice on drive management.
How to use the included AC-powered Battery Eliminator.
Recommended ATOMOS NP-F type batteries and usage.
Optional accessory for powering the device from a D-Tap source.
Adds SDI connectivity for monitoring and recording SDI video.
Provides a high-speed, robust hardwired network connection.
Connects the RF antenna for AirGlu™ wireless SYNC functionality.
Red light on the rear indicating recording status.
12G compliant SDI input connector.
Connects Wi-Fi antennas for wireless networking.
Slot for attaching power sources like batteries or eliminators.
Explanation of the primary control icons on the monitoring screen.
How to start and stop recording using the REC button.
How to access and play recorded clips.
How to access monitoring features and information display.
How to access editing tools and features.
How to choose between HDMI, SDI, or AtomX CAST as the video input.
How to choose between HDMI, SDI, or AtomX CAST as the video input.
Improves signal locking for specific HDMI cameras.
Indicators for selected channel and signal link status.
Improves signal locking for specific SDI cameras.
Displays the camera or device manufacturer name.
Displays the EDID device name if available from the HDMI device.
Options for controlling cameras or calibration.
Enables HDR image processing for recording and preview.
Selects the manufacturer of the input camera.
Adjusts the Log curve for specific camera manufacturers.
Selects the color gamut of the input signal.
Displays the resolution of the video output.
Shows resolution and frame rate of HDMI output.
Trims 17:9 DCI input to 16:9 for UHD output.
Loops embedded or generated timecode for output.
Adjusts output for specific 12G SDI standards.
Converts Log input to HDR display standards like HLG or PQ.
Detects SDI input and configures output connector.
Specifies the 3G-SDI type for compatibility.
Shows expected recording time based on current settings.
Caches last seconds of video for seamless recording start.
Displays resolution and frame rate being recorded.
Selects bit depth for H.265 codec recordings.
Applies pulldown removal for specific source signals.
Applies pulldown removal for specific source signals.
How to activate and install the H.265 codec.
Enables network and cloud features for ATOMOS CONNECT.
Share media and collaborate via cloud services.
Upload video and audio from camera to Frame.io.
Connects NINJA V+ to Frame.io C2C ecosystem for uploads.
Steps to create a Frame.io account for cloud uploads.
Guide to setting up live streams on Facebook.
To Next Page
