Choosing your power source
The NINJA V+ can be powered by the included AC-powered Battery Eliminator, or by
using a compatible DC battery. If you are the owner of other ATOMOS devices, the bat-
teries you have for these devices (NP-F/L Series) will be compatible with your NINJA V+.
Battery Eliminator
Included in the NINJA V+ box is a Battery Eliminator. This connects directly to the battery
slot of your NINJA V+ and allows you to connect the included power supply for an AC
power connection. It is also compatible with the ATOMOS coiled DC to D-Tap cable.
To purchase a Battery Eliminator, visit the Battery Eliminator page on the ATOMOS web-
site.
The Battery Eliminator is suitable for use with ATOMOS devices only.
Batteries
We recommend the use of optional ATOMOS NP-F type batteries and the ATOMOS Power
Kit with the NINJA V+. The NINJA V+ can also use standard NP-F/L-Series compatible bat-
teries. Charge new batteries before using them, using a compatible battery charger. To
attach the battery, gently slide it down into the slot until it locks into position. To remove
a battery, push the latch to release it.
To purchase ATOMOS NP-F type batteries, visit the 5200mAh (4 cell) or 7800mAh (6 cell)
pages on the ATOMOS website.
To Next Page
Loading...
Need help?
General
