Wi-Fi Menu
When the Atomos CONNECT accessory is attached to your NINJA V+ and the device is in
Connect Mode, you can access settings on the Wi-Fi menu tab. This menu provides set-
tings for connecting your device to a Wi-Fi network, so that you can connect to Atomos
Cloud Services. For more information on Connect Mode refer to the "Connect Menu" on
page 133 section.
An Atomos CONNECT must be attached to your NINJA V+ and the device
must be in Connect mode before the Wi-Fi Menu page appears in the menu
system.
How to connect to a Wi-Fi network:
1. Navigate to the Wi-Fi Menu page on your NINJA V+.
2. Tap the toggle switch at Wi-Fi to enable Wi-Fi.
The WiFi on/off status is saved on reboot
To Next Page
Loading...
