Input Source
The source section allows you to select the input signal connection type, and related set-
tings.
Input
When you have an AtomX SDI module or ATOMOS CONNECT attached to your NINJA V+,
you will be able to tap on Input to switch between HDMI and SDI inputs. For more inform-
ation refer to "Input via AtomX SDI Expansion Module" on page 92 and "Input via Atomos
CONNECT" on page 94
You can only switch from HDMI input to SDI input when the AtomX SDI
Expansion Module or ATOMOS CONNECT is connected to your NINJA V+.
Signal
The resolution and frame rate of the selected input source is displayed. No Input will be
displayed when there is no input connected.
To Next Page
Loading...
