Name: Atomos NINJA V+
Brand: Atomos
Rating: 4 (1 reviews)

To Next Page

To Previous Page

SDI RAW

You can add the SDI RAW feature to your NINJA V+ by purchasing the optional SDI RAW

upgrade at my.atomos.com.

After activating the feature on your NINJA V+, you can use the AtomX SDI Expansion

module or ATOMOS CONNECT to record RAW over SDI from compatible cameras. Refer to

the "Activation Menu" on page 225 section for more information on the activation pro-

cess.

When RAW over SDI is enabled on a connected camera, your NINJA V+ will

automatically detect the RAW signal and prompt you to select ProRes RAW

as the recording codec.

To use the ATOMOS CONNECT with your NINJA V+, ensure you have

AtomOS firmware version 10.8 installed. Visit atomos.com/support to down-

load firmware for your device.

To use the AtomX SDI Module for SDI RAW, firmware version 10.65 or later

needs to be installed on your NINJA V+. For SDI RAW recording from Sony

FS-Series cameras, firmware version 10.71 needs to be installed.

Other manuals for Atomos NINJA V+

Questions and Answers:

Need help?

Do you have a question about the Atomos NINJA V+ and is the answer not in the manual?

General