OUTPUT OPTIONS
4K to 2K Output
Allows you to scale 4K or UHD inputs for output. This will scale 4K to 2K and UHD will be
scaled to HD 1080p.
DCI Crop
When enabled, this setting trims the 17:9 DCI input to 16:9 converting the signal to UHD.
When 4K to 2K Output is On, the output will down scale to HD.
HDMI timecode
Allows for the embedded timecode or in unit generated timecode to be looped out. The
option is present to allow you to turn the timecode as this can disrupt some consumer
equipment that is not intended to receive embedded timecode. Tap to toggle between
on/off.
SDI Compatibility Mode
This option will appear when you have an AtomX SDI Module connected. For more inform-
ation refer to the "Output via AtomX SDI Expansion Module" on page 111 section.
HDR
Here you are able to set a conversion from your LOG input to a HDR display standard such
as HLG or PQ. You can also define the output color gamut from your camera’s gamut to a
display standard for BT2020, DCI-P3 or Rec709.
HDR Out
Enable or disable HDR on the output.
HDR Type
Allows you to select the HDR type to output. Tap to cycle through PQ, HLG and Dolby
Vision Tunnels.
To Next Page
Loading...
Need help?
General
