How to control a Z CAM camera with camera control mode on NINJA V+:
Once you have entered the camera control mode, you can manually adjust the settings of
your ZCAM from the display of your NINJA V+. Tap one of the settings across the top of
the screen like aperture, shutter speed, ISO or WB to bring up the adjustment arrows
below the selected setting. Tap on the left or right arrow to adjust the values for the set-
ting.
Auto ISO / Auto WB
When you adjust the settings for ISO or WB, an additional Auto ISO or Auto WB icon
will appear on the right side of the screen. If you tap on this icon, it will enable the auto-
matic ISO or automatic WB mode respectively. The icon will have a white border, and
an ‘A’ will be displayed beneath ISO or WB when enabled. Tap the icon again to disable
the automatic mode.
To Next Page
Loading...
