AuCom EMX3-1600C - 3 Introduction; Feature List

INTRODUCTION
3. Introduction
3.1 Feature List
Selectable soft starting profiles
• Adaptive Control
• Constant Current
• Current Ramp
Selectable soft stopping profiles
• Coast To Stop
• Timed voltage ramp soft stop
• Adaptive Control
• Brake
Extensive input and output options
• Remote control inputs
(3 x fixed, 2 x programmable)
• Relay outputs
(1 x fixed, 3 x programmable)
• Analog output
• Built-in PT100 RTD input
• Optional expansion cards
Easy-to-read display with comprehensive feedback
• Removable keypad
• Multi-language feedback
• Date and time stamped event logging
• Operational counters (number of starts, hours-run, kWh)
• Performance monitoring (current, voltage, power factor,
kWh)
• User-programmable monitoring screen
Customisable protection
• Motor overload
• Excess Start Time
• Undercurrent
• Instantaneous overcurrent
• Current imbalance
• Mains frequency
• Input Trip
• Motor thermistor
• Power circuit
• Phase sequence
Models for all connection requirements
• 23 A~1600 A (nominal)
• 200~440 VAC
• 380~690 VAC
• Internally bypassed options
• In-line or inside delta connection
Optional features for advanced applications
• Input/output expansion
• RTD and Ground fault protection
• Communication modules: Ethernet (Profinet,
Modbus TCP, Ethernet/IP), Profibus, DeviceNet,
Modbus RTU, and USB
6 | User Manual (710-04840-00M)