AuCom EMXAe - Page 75

PROGRAMMABLE PARAMETERS
10I – User Parameter 2
Options:
Refer to parameter 10H User Parameter 1 for details.
Default:
Mains Frequency
Description:
Selects which information will be displayed on the main
monitoring screen. Refer to parameter 10H
User Parameter 1
for details.
10J – User Parameter 3
Options:
Refer to parameter 10H User Parameter 1 for details.
Default:
Motor pf
Description:
Selects which information will be displayed on the
programmable monitoring screen. Refer to parameter 10H
User Parameter 1 for details.
10K – User Parameter 4
Options:
Refer to parameter 10H User Parameter 1 for details.
Default:
Motor Temperature (%)
Description:
Selects which information will be displayed on the
programmable monitoring screen. Refer to parameter 10H
User Parameter 1 for details.
10L – User Parameter 5
Options:
Refer to parameter 10H User Parameter 1 for details.
Default:
Hours Run
Description:
Selects which information will be displayed on the
programmable monitoring screen. Refer to parameter 10H
User Parameter 1 for details.
10M – User Parameter 6
Options:
Refer to parameter 10H User Parameter 1 for details.
Default:
Number of Starts
Description:
Selects which information will be displayed on the
programmable monitoring screen. Refer to parameter 10H
User Parameter 1 for details.
EMX4e User Manual (710-18433-00C) | 73