AuCom EMXAe - Communications Card

PROGRAMMABLE PARAMETERS
9.13 12 Communications Card
12A – Modbus Address
Range:
1 - 254
Default:
1
Description:
Sets the Modbus RTU network address for the soft starter.
12B – Modbus Baud Rate
Options:
4800
9600 (default)
19200
38400
Description:
Selects the baud rate for Modbus RTU communications.
12C – Modbus Parity
Options:
None (default)
Odd
Even
10-bit
Description:
Selects the parity for Modbus RTU communications.
12D – Modbus Timeout
Options:
Off (default)
10 seconds
60 seconds
100 seconds
Description:
Selects the timeout for Modbus RTU communications.
12E – Devicenet Address
Range:
0 - 63
Default:
0
Description:
Sets the DeviceNet network address for the soft starter.
12F – Devicenet Baud Rate
Options:
125 kB (default)
250 kB
500 kB
Description:
Selects the baud rate for DeviceNet communications.
12G – Profibus Address
Range:
1 - 125
Default:
1
Description:
Sets the Profibus network address for the soft starter.
74 | EMX4e User Manual (710-18433-00C)