AuCom EMXAe - Page 77

PROGRAMMABLE PARAMETERS
12H – Gateway Address
Range:
0 - 255
Default:
192
Description:
Sets the first component of the network gateway address. The
gateway address is set using parameters 12H~12K and the
default address is 192.168.0.100.
12I – Gateway Address 2
Range:
0 - 255
Default:
168
Description:
Sets the second component of the network gateway address.
12J – Gateway Address 3
Range:
0 - 255
Default:
0
Description:
Sets the third component of the network gateway address.
12K – Gateway Address 4
Range:
0 - 255
Default:
100
Description:
Sets the fourth component of the network gateway address.
NOTE
The network address can also be set via the Network Address options in the
Setup Tools. Refer to
Network Address on page 36 for details.
12L – IP Address
Range:
0 - 255
Default:
192
Description:
Sets the first component of the soft starter's IP address, for
Ethernet communications. The IP address is set using
parameters 12L~12O and the default address is 192.168.0.2.
12M – IP Address 2
Range:
0 - 255
Default:
168
Description:
Sets the second component of the soft starter's IP address, for
Ethernet communications.
12N – IP Address 3
Range:
0 - 255
Default:
0
Description:
Sets the third component of the soft starter's IP address, for
Ethernet communications.
12O – IP Address 4
Range:
0 - 255
Default:
2
Description:
Sets the fourth component of the soft starter's IP address, for
Ethernet communications.
NOTE
The network address can also be set via the Network Address options in the
Setup Tools. Refer to
Network Address on page 36 for details.
EMX4e User Manual (710-18433-00C) | 75