AuCom EMXAe - Page 78

PROGRAMMABLE PARAMETERS
12P – Subnet Mask
Range:
0 - 255
Default:
255
Description:
Sets the first component of the network subnet mask, for
Ethernet communications. The subnet mask is set using
parameters 12P~12S and the default mask is 255.255.255.0.
12Q – Subnet Mask 2
Range:
0 - 255
Default:
255
Description:
Sets the second component of the network subnet mask, for
Ethernet communications.
12R – Subnet Mask 3
Range:
0 - 255
Default:
255
Description:
Sets the third component of the network subnet mask, for
Ethernet communications.
12S – Subnet Mask 4
Range:
0 - 255
Default:
0
Description:
Sets the fourth component of the network subnet mask, for
Ethernet communications.
NOTE
The network address can also be set via the Network Address options in the
Setup Tools. Refer to
Network Address on page 36 for details.
12T – DHCP
Options:
Disable (default)
Enable
Description:
Selects whether the communications card will accept an IP
address assigned by DHCP.
NOTE
DHCP addressing is available with Modbus TCP and Ethernet/IP. DHCP
addressing is not supported with Profinet.
12U – Location ID
Range:
0 - 65535
Default:
0
Description:
Sets the soft starter's unique location ID.
76 | EMX4e User Manual (710-18433-00C)