AuCom EMXAe - Page 91

TROUBLESHOOTING
Symptom
Probable Cause
File Missing
A USB function has been selected in the menu, but the
required file cannot be found.
Save/Load Master Parameters uses a file called
Master_Parameters.par, at the top level of the USB
drive. For these functions to work correctly, do not move
or rename this file.
File Not Valid
A USB function has been selected in the menu, but the
file is not valid.
File Empty
A USB function has been selected in the menu and the
file has been found, but does not contain the expected
content.
Rating Not Valid
The value of parameter 20D Model Rating is incorrect.
Parameter 20D is not user-adjustable. Contact your
local supplier for advice.
EMX4e User Manual (710-18433-00C) | 89