Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
- -> Use mandrel T10060 or offset Allen key to lock ribbed belt tensioner.
- Detach ribbed belt.
- -> Detach pipe for secondary air system from holder at engine -arrows-.
- -> Screw out bolts -2- and -3- and pull holder off guide tube for dipstick -4-.
- Lay aside holder with connected hoses.
- Pull off air hoses at secondary air pump.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
24 27 - Starter, Current supply
To Next Page
Loading...
