Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Display on VAS 5051:
1 - Enter channel number
- Use keypad -2- to enter "21" for "Adaption channel 21" and confirm by touching Q key.
-> Display on VAS 5051:
1 - Channel 21
Read and test
2 - New number of
keys
4 - Moving bar positioned on current adaption value, e.g. "2"
Display shows number of ignition keys (in this case "2") matched to system
-> Display on VAS 5051:
- Enter number of keys to be matched.
Example: 4 keys including key inserted in ignition lock
Note:
A maximum of 8 keys can be matched.
- Shift moving bar -5- to right or touch area to right of bar until it is positioned under number "4" (example).
Note:
Another alternative is to touch "Keypad" key -3-, enter number "4" on keypad and confirm entry by touching Q
key.
- Touch "Save" key -4-.
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
180 01 - Self-diagnosis