Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Display on VAS 5051:
1 - Channel 21
Read and test
2 - New number of
keys
4 - Original value "2"
New value "4" (example)
- Confirm new adaption value by touching "Accept" key -3-.
- Adaption is then implemented
Note:
The adaption period for each key must not exceed 30 seconds, as otherwise fault lamp in dash panel insert
starts to flash and entire release procedure (PIN) must be repeated.
-> Display on VAS 5051 following adaption:
1 - Channel 21
Value "4" saved
- Fault lamp in dash panel insert goes out; key in ignition lock matched
- Terminate function "10 - Adaption" by touching ◂ key.
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
6.11 - Matching of vehicle keys 181
To Next Page
Loading...
