Audi A3 1997 - Page 47

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Display on VAS 5051 following adaption:
Example:
1 - Channel 11
Value 20 saved
- Terminate function "10 - Adaption" by touching ◂ key.
Adaption channel 12 - Remaining time prior to inspection service
This function can be used to enter remaining time in days prior to next inspection service on dash panel insert
replacement.
-> Display on VAS 5051:
1 - Enter channel number
- Use keypad -2- to enter "12" for "Adaption channel 12" and confirm by touching Q key.
-> Display on VAS 5051:
1 - Channel 12
Read and test
4 - Moving bar positioned on current adaption value 37
Notes:
◆ The respective specification can only be entered in 10-day steps; the display is thus also in 10 day units.
◆ The adaption value 37 represents the factory-set maximum time of 370 days for the inspection service.
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
2.11 - Adaption 41