Audi A3 1997 - Page 48

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
◆ The value entered is decremented down to 0 days.
- Use moving bar to change adaption value =>"A - Changing adaption value with moving bar", Page 22 .
Or
- Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page 24 .
- Enter 5-digit adaption value. Use "0" to fill up empty spaces.
Example:
Specification: 280 days
Keypad entry: 00028
Note:
Fault message "Function unknown or cannot be implemented at present" appears if an implausible value is
entered.
-> Display on VAS 5051 following adaption:
Example:
1 - Channel 12
Value 28 saved
- Terminate function "10 - Adaption" by touching ◂ key.
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
42 01 - Self-diagnosis