29
When the turntable is moved
Using the product’s original packaging materials, pack the turntable in the reverse order of unpacking it. If you do not
have the original packaging materials, take the following measures:
After turning off the power switch, disconnect the AC adapter from the outlet, remove the platter, and then wrap the
turntable body so that it does not get damaged. If the product is moved while the platter is still seated, it may
damage the spindle.
Fix the tonearm with the clamp.
Remove the counterweight.
Remove the headshell from the tonearm with the cartridge’s protector attached, and then wrap the entire headshell
assembly so that it does not get damaged.
Wrap the turntable body with paper or a soft cloth so that it does not get damaged.
To Next Page
Loading...
Need help?
General
