18
Using the product
This product does not have a built-in phono equalizer function. Connect the RCA audio cable to the PHONO input
terminal of a phono equalizer or an amplifier with a built-in phono equalizer.
Connecting to a phono equalizer or an amplifier with built-in
phono equalizer
The RCA audio cable's red jack is for the right (R) channel, and the white jack is for the left (L) channel.
Phono equalizer or amplifier with built-in phono equalizer
Depending on the equipment you are connecting, a ground (earth) terminal may exist near the phono input
jack. If this is the case, connect to it using the ground line from the RCA audio cable. This will help prevent a
low humming noise that might otherwise be heard during playback.
Before playing a record
1
Plug the AC adapter into an outlet.
To Next Page
Loading...
Need help?
General
