Specifications
34
Cartridge type
VM
Recommended load impedance
47,000 ohms
Frequency response
20 to 25,000 Hz
Output voltage
3.5 mV (mV at 1 kHz, 5 cm/sec)
Stylus
2.7 × 0.26 mil Nude Shibata stylus
Cantilever
Aluminum pipe
Tracking force range
1.8 to 2.2 g (standard 2.0 g)
Cartridge weight
6.1 g (0.22 oz)
Headshell specifications
Headshell model
AT-HS4 SV
Headshell weight
8.5 g (0.30 oz) (including lead wires)
7.7 g (0.27 oz) (excluding lead wires)
Headshell overhang adjustment
± 5 mm
General specifications
Power supply requirements
100 to 240 V, 50/60 Hz, 0.5 A Max.
Power consumption
1.8 W
AC Adapter
12 V, 1.0 A
Dimensions
420 mm (17") × 340 mm (13") × 135 mm (5.3") (W × D × H)
Weight
8.0 kg (18 lbs)
Accessories
Dust cover, Platter (with drive belt), Dust cover hinges, Counterweight,
Headshell (AT-HS4 SV) with VM stereo cartridge (AT-VM95E BK),
Replacement stylus (AT-VMN95SH CL), 45 RPM adapter, RCA audio cable
(Approx. 1.0 m (3.3')), AC adapter (Approx. 1.5 m (4.9')), Hexagonal wrench,
Gloves
Replacement stylus (sold
separately)
AT-VMN95E BK, AT-VMN95SH CL
[1]
Replacement headshell (sold
separately)
AT-HS4 SV
Replacement belt (sold
separately)
AT-LP2022 exclusive belt
[1] The replacement stylus (AT-VMN95SH CL (clear color)) is a limited product of AT-LP2022. Repair parts are limited. Please note that we may not be able
to fulfill your request for repair if repair parts are no longer available. In such cases, a commercially available replacement stylus (AT-VMN95SH (brown
color)) can be used.
For product improvement, the product is subject to modification without notice.
To Next Page
Loading...
