Using the product
22
Stopping the record
1
Lower the volume of the amplifier, etc. sufficiently.
2
Lift the tonearm lift control lever.
3
Return the tonearm to its original position and fix it with the clamp.
4
Turn the control knob to the “STOP” position.
The platter slows down and rotation stops.
5
Remove the record after the platter has come to a complete stop.
6
Attach the protector.
If the platter gets dirty, it can easily scratch the record, so remove the platter periodically and wipe off any
dust.
To prevent the record from becoming scratched or warped, remove it after use.
Do not use a disk stabilizer.
Do not use a platter other than the one provided.
This product is not intended for DJs. Do not touch the record or the platter while the record is playing.
To Next Page
Loading...
Need help?
General
