AudioCodes 405HD - Table 6-6: PSK Parameters

400HD Series IP Phones
Administrator's Manual 134 Document #: LTRT-11973
Table 6-6: PSK Parameters
Parameter Name Description
personal_settings/soft_keys/n/psk_index
personal_settings/soft_keys/ongoing_call/n/psk_index
There are separate index number
series for the idle screen and ongoing
call screen.
For the first parameter (idle screen):
n=0-19. Valid values that can be
configured: 0-11.
For the second parameter (ongoing
call screen): n=0-19. Valid values that
can be configured: 0-11.
These parameters associate softkeys
with the PSK index. However, each
index number represents unique
functionality. For example, if you
configure psk_index 1 to activate an
intercom (an idle screen functionality),
you cannot use the same index
(psk_index 1) to connect to a
Voicemail server (ongoing call screen
functionality).
personal_settings/soft_keys/psk/n/is_dial_required Configure either:
 0 (disable) (default)
 1 (enable)
Determines whether a personal dialing
code is required for the PSK. When
enabled, the user is prompted on the
phone to enter a personal code to
activate this event. For example, to
connect to a Voicemail server.
The parameter only applies when
'Programmable SK' is set as the
key_function.
n=0-11
personal_settings/soft_keys/psk/n/PSKlabel Defines the PSK label which is
displayed on the phone's screen for
the configured PSK.The parameter
only applies when 'PSK' is set as the
key_function.
n=0-11
personal_settings/soft_keys/psk/n/prefix Defines the prefix which sends a SIP
INVITE to the softswitch to activate
this feature (event). For example, *70.
This parameter only applies when
PSK is configured for parameter
key_function. Up to 128 characters
(any characters).