AudioCodes 405HD - Ending an Established Call; Viewing Missed, Received and Dialed Calls

400HD Series IP Phones
Administrator's Manual 62 Document #: LTRT-11973
5.1.2 Configuring Proxy and Registration
Proxy and Registration settings can be configured.
 To configure Proxy and Registration:
• Use the table as reference.
Table 5-2: Proxy and Registrar Parameters
Parameter Description
voip/signalling/sip/use_proxy
Determines whether to use a SIP Proxy
server.
 0 Disable (default)

1
Enable
voip/signalling/sip/proxy_address
The IP address or host name of the SIP
proxy server. Default: 0.0.0.0
voip/signalling/sip/proxy_port
The UDP or TCP port of the SIP proxy
server.
Range: 1024 to 65535. Default: 5060.
voip/signalling/sip/registrar_ka/enabled
Determines whether to use the registration
keep-alive mechanism based on SIP
OPTION messages.
 0 Disable (default)
 1 Enable
Note:
 If there is no response from the server,
the timeout for re-registering is
automatically reduced to a user-defined
value
(voip/signalling/sip/registration_failed_ti
meout)
 When the phone re-registers, the keep-
alive messages are re-sent periodically.
voip/signalling/sip/registrar_ka/timeout
Defines the registration keep-alive time
interval (in seconds) between Keep-Alive
messages.
Range: 40 to 65536. Default: 60.
voip/signalling/sip/proxy_timeout
The SIP proxy server registration timeout
(in seconds).
Range: 0 to 86400. Default: 3600.
voip/signalling/sip/use_proxy_ip_port_for_registrar
Determines whether to use the SIP proxy's
IP address and port for registration. When
enabled, there is no need to configure the
address of the registrar separately.
 0 Disable
 1 Enable (default)
voip/signalling/sip/sip_registrar/enabled
Determines whether the phone registers to
a separate SIP Registrar server.
 0 Disable (default)
 1 Enable