Administrator's Manual 3. Configuring Automatic Provisioning
Version 3.4.3 35 400HD Series IP Phones
Figure 3-4: DHCP User Classes
3. Click the Add… button.
Figure 3-5: New Class
4. In the New Class screen, enter Display name and Description as shown in the figure
above, and then in the ASCII field, enter the User Class Phone Type (see the Packet
Bytes window in Wireshark below, and see the table below for the other AudioCodes
phone models) to be sent from the phone during DHCP Discover via Option 77
(supported by DHCP Server 2008). Do this for each AudioCodes phone model so that
a User Class entry for each model deployed will exist when completed.
Figure 3-6: Packet Bytes Window
5. Make sure one DHCP User Class entry exists for each AudioCodes phone model
deployed in the enterprise.
To Next Page
Loading...
