AudioCodes 405HD - Defining Phone Keys as Paging Dials

Administrator's Manual 4. Configuring Networking
Version 3.4.3 53 400HD Series IP Phones
4.2.2 Configuring Partial DHCP
Partial DHCP can be configured with the following parameters:
Table 4-6: Partial DHCP Parameters
Parameter Description
Partial DHCP
network/lan/dhcp If 'lan_type' is configured to DHCP, this parameter
and the parameters in this table must be
configured.
network/lan/dhcp/domain_name/enabled Enables setting the domain name manually.
 0 Disable (default)
 1 Enable
Note: If enabled,
network/lan/fixed_ip/domain_name
must be set.
network/lan/dhcp/ip_address/enabled Enables setting the IP address manually.
 0 Disable
 1 Enable (default)
Note: If enabled,
network/lan/fixed_ip/ip_address must be set.
network/lan/dhcp/netmask/enabled Enables setting the network mask manually.
 0 Disable
 1 Enable (default)
Note: If enabled, network/lan/fixed_ip/netmask
must be set.
network/lan/dhcp/gateway/enabled Enables setting the default gateway manually.
 0 Disable
 1 Enable (default)
Note: If enabled, network/lan/fixed_ip/gateway
must be set.
network/lan/dhcp/primary_dns/enabled Enables setting the primary DNS manually.
 0 Disable (default)
 1 Enable
Note: If enabled,
network/lan/fixed_ip/primary_dns must be set.
network/lan/dhcp/secondary_dns/enabled Enables setting the secondary DNS manually.
 0 Disable (default)
 1 Enable
Note: If enabled,
network/lan/fixed_ip/secondary_dns must be
set.