Administrator's Manual 3. Configuring Automatic Provisioning
Version 3.4.3 31 400HD Series IP Phones
3.1.2.1 Provisioning using DHCP Option 160
Phones can get a provisioning URL from DHCP Option 160, 66/67 or 43 [support pending].
Option 160 has the highest priority, following by Option 66/67, and then Option 43.
3.1.2.2 Configuring Automatic Provisioning by DHCP Server
Phones are automatically provisioned by the enterprise's DHCP server when initially
connected to the IP network and to the power supply.
Network administrators can then configure periodic automatic provisioning by DHCP server.
For more information, see Configuring Automatic Provisioning under Section 3.
Note: To implement secure provisioning using HTTP/S, the HTTP/S server on the far
end (from where you are loading the files) must also support HTTP/S.
3.1.2.3 Technician's Digit Key Code
Note: Applies to the low-end phones. Support pending on the high-end phones and the
HRS conference device.
Technicians installing phones at customer sites do not need to connect laptops to phones to
provision them. After connecting phones to the network, technicians can enter a specific digit
key code which changes the phones' provisioning URL to the server's URL. If the code that
the technician enters matches, the phones are automatically provisioned from that server.
Note: The feature requires software customization.
To Next Page
Loading...
