AudioCodes 405HD - Page 178

400HD Series IP Phones
Administrator's Manual 178 Document #: LTRT-11973
Parameter Description
system/syslog/server_port Defines the UDP port of the Syslog server.
The valid range is 0 to 65,535. The default port is
514.
Note: This parameter is applicable when Activate is
set to Network or Both.
Note: The following Severity level options are applicable for the fields below:
• NONE
• EMERGENCY
• ERROR
• WARNING
• NOTICE
• INFO
•
DEBUG
Note: The following two Severity level options are applicable for the fields below:
• NONE
•
DEBUG
system/syslog/component/btoe Default: NONE.
system/syslog/component/cert Default: NONE.
system/syslog/component/cgi Default: NONE.
system/syslog/component/control_center
Default: NONE. Responsible for Networking and
running other processes.
system/syslog/component/dsp
Default: NONE. Defines the voice engine of the
phone (430HD and 440HD only).
system/syslog/component/emsc Default: NONE.
system/syslog/component/ice_stack Default: NONE.
system/syslog/component/ieee802_1x Default: NONE. Defines the security protocol.
system/syslog/component/infra
Default: NONE. Defines logging for code
infrastructure.
system/syslog/component/kernel Default: NONE.
system/syslog/component/lcd_display Default: NONE. Defines the phone screen display.
system/syslog/component/lib Default: NONE.
system/syslog/component/media Default: NONE.
system/syslog/component/sip_call_control Default: NONE. Defines MTR layer Radvision.
system/syslog/component/sip_stack Default: NONE. Defines SIP Stack Radvision.
system/syslog/component/sipe Default: NONE.
system/syslog/component/voip_application Default: NONE. Defines multi-layer VoIP application.
system/syslog/component/watchdog
Default: NONE. Responsible for keeping other
processes running.
system/syslog/component/web_server Default: NONE. Defines the phone Web server.
system/syslog/component/xsi Default: NONE. Defines logging for the xsi feature.