What to do if Audison bit One HD Signal Processors do not connect to PC software?
If your Audison bit One HD Signal Processors do not connect to the PC software, you can try the following steps: 1. Save the setup as a file on the PC using the function: FILE / SAVE SETUP. 2. Exit the software. 3. Turn on the bit One HD. 4. Launch the software again. 5. Load the setup file again using the function: FILE / LOAD SETUP.
What to do if Audison bit One HD Signal Processors do not respond?
If your Audison bit One HD Signal Processors are not responding, try the following: 1. Turn the bit One HD off by DRC MP, disconnecting the Remote IN, or disconnecting the power supply cable for a few seconds. 2. Save the setup as a file on the PC using the function: FILE / SAVE SETUP. 3. Exit the software. 4. Turn on the bit One HD. 5. Launch the software again. 6. Load the setup file again using the function: FILE / LOAD SETUP.
How to save settings on Audison bit One HD?
To save settings on your Audison Signal Processors, remember to select 'File' from the main software menu via your PC and then choose 'Finalize to bit One HD.' This ensures that your selected settings are saved.
General| Brand | Audison |
|---|---|
| Model | bit One HD |
| Category | Signal Processors |
| Language | English |
To Next Page
