57
USER'S MANUAL
bit One HD /
9.4 RESCUE MODE
If there are product UPGRADES available online, proceed as
follows:
- save the previous setup (if you wish to consult it in OFFLINE mode);
-
disconnect the bit One HD”Pre Out” .
-
disconnect the bit One HD terminal block.
-
place the Upgrade Mode switch to “ON” position.
-
connect the bit One HD terminal block. The logo on the
product starts flashing.
RESCUE MODE
Start the bit One HD PC software and select “RESCUE
MODE”.
1. Access the "File" menu in the PC management
software and choose "Check for Updates".
2. When you select "Check for Updates", the internet
browser in the PC will open up and will automatically
search for the URL: www.audisonbitdrive.eu.
Once the related page is open, click on the LINK for
the product.
3. Identify the newest le whose name includes the
word Firmware followed by four numbers and click
on the specic symbol to start the download.
When requested, save the le to the PC.
4. Select "Update Firmware". The program will ask you
to select the le that was just saved from the
Download Area or that was previously saved in the PC.
WARNING: the bit One HD Firmware update procedure may
be delicate. It is extremely important that it is performed
under the best possible conditions.
If the operation is started and prematurely interrupted
(e.g.: PC locked up, loss of power to the bit One HD,
accidental disconnection of the USB cable during update),
our After Sales Service might need to be contacted to
reprogram the bit One HD.
5. Before starting the bit One HD update, the program
warns you to:
- not disconnect the bit One HD from the PC;
- not disconnect the bit One HD from power;
- temporarily disable the PC automatic stand-by
processes;
- temporarily disable the screen saver on the PC;
- close all running applications;
- temporarily disable the anti-virus and anti-spyware
systems
9
To Next Page
Loading...
Need help?
General
